RIDGID HD18000 Mode D'emploi page 15

OPERATION
INSERT
HOSE
Blower Port
Ridges
Tug-A-Long Positive
Locking Hose with
Dual-Flex
Swivel End of Hose
Extension
Wand
(Optional)
Remove Hose:
1. Rotate Hose End in either direction to
2. Press the Hose Release Button and
Hose Release
Button
Hose Release
Button
NOTE: When used as a Vacuum, the Muffler/
Diffuser should be installed into the Blower
Port, as shown. Using the Muffler/Diffuser will
help disperse the exhaust air stream.
Muffler/
Diffuser
15
disengage Blower Port Ridges.
pull the Hose End straight out of the
Blower Port.
REMOVE
HOSE
Blower Port
Ridges
1
Blower Port
Ridges
Muffler/Diffuser
Release Button
2
1