RIDGID HD18000 Mode D'emploi page 11

ASSEMBLY
2. To Remove Hose: Rotate the end
of the Tug-A-Long Positive Locking
Hose with Dual-Flex in either direction
to release the Hose Latch from the
Inlet Ridges. Press the Hose Release
Button and pull the Hose end straight
out of the Vac Inlet.
REMOVE
HOSE
Inlet
Ridges
Hose
Release
Button
1
1
2
11
Locking Accessories
1. To Connect
RIDGID Wet/Dry Vac includes Locking
Accessories to prevent the Accessories
from falling off when in use. To
connect the Accessories, align the
Nozzle Ridges of the Accessory with
the Release Button of your Extension
Wand. Press to secure the Nozzle to
the Extension Wand.
CONNECT:
Accessory Nozzle
Ridges
2. To Disconnect Accessory: Twist
the Nozzle and Extension Wand to
disengage the Nozzle Ridges and pull.
You may also press the Release Button
and pull to disengage.
DISCONNECT:
Accessory Nozzle
Ridges
Accessory: Your
Extension Wand
Release Button
Extension Wand
Release Button