Setup; Shipping And Handling; Unpacking; Inspection - Invacare Platinum Série Manuel D'utilisation

4 Setup

4.1 Shipping and Handling

Before you install and operate the concentrator, please refer to
Platinum Series User Manual.
The Platinum concentrator should ALWAYS be kept in the upright
position to prevent cabinet damage while being transported. The
shipping container has been designed to assure maximum protection
of the concentrator.
If the concentrator is to be reshipped by common carrier, it should
be packed in a new carton. Additional cartons are available from
Invacare.
The air compressor suspension system has been engineered to
withstand severe motion and orientation.

4.2 Unpacking

1195660-A
1. Check for any obvious damage to the carton or its contents. If
damage is evident, notify the carrier, or your local dealer.
2. Remove all loose packing from the carton.
3. Carefully remove all the components from the carton.
Unless the oxygen concentrator is to be used
IMMEDIATELY, leave concentrator in its packaging for
storage until use is required.

4.3 Inspection

1. Inspect/examine exterior of the concentrator for nicks, dents,
cracks, scratches or other damage.
2. Inspect all components.

4.4 Storage

1. Store the repackaged oxygen concentrator in a dry area. Refer to
Typical Product Parameters for storage temperature parameters.
2. DO NOT place objects on top of repackaged concentrator.
Setup
15