Electrolux IK 325 Mode D'emploi page 38

Decrease refrigerator temperature
%
(down to min. 2 °C):
After 3 seconds the temperature display
starts to flash and shows the selected
temperature value. Each time you now
press the button, the temperature value
is decreased by 1 °C. If you hold down
the button, the value decreases automa-
tically until you release the button or the
minimum value is reached. Approx. 5
seconds after releasing the button, the
display stops flashing and the current
average temperature is displayed again.
Refrigerator temperature display:
&
A temperature value averaged over 2
hours is displayed, which may be diffe-
rent from the set value. This can be the
case particularly after defrosting or if the
door has been open for a while. If the
temperature is lower than -5 °C, «LO» is
displayed; if it is higher than 20 °C, «HI»
is displayed.
Freezer temperature display
(
An actual value averaged over 2 hours is
displayed, which may be different from
the set value. This can be the case parti-
cularly if the door has been open for a
while or if a large amount of warm food-
stuffs have just been stored. If the tem-
perature is lower than -30°C, «LO» is
displayed; if it is higher than -5 °C, «HI»
is displayed.
Increase freezer temperature
)
(up to max. -14°C):
After 3 seconds the temperature display
starts to flash and shows the selected
temperature value. Each time you now
press the button, the temperature value
is increased by 1°C. If you hold down the
button, the value increases automatically
until you release the button or the maxi-
mum value is reached. Approx. 5
38
seconds after releasing the button, the
display stops flashing and the current
average temperature is displayed again.
Decrease freezer temperature
+
(down to min. -24 °C):
After 3 seconds the temperature display
starts to flash and shows the selected
temperature value. Each time you now
press the button, the temperature value
is decreased by 1 °C. If you hold down
the button, the value decreases automa-
tically until you release the button or the
minimum value is reached. Approx. 5
seconds after releasing the button, the
display stops flashing and the current
average temperature is displayed again.
Fast freeze button
§
This activates maximum chilling perfor-
mance for the freezer. A snowflake
appears on the display. After 24 hours
the system is reset to the original setting
and the snowflake disappears. The fast
freeze function can also be disabled
before this time by pressing the button
manually again.
Fast cool button
/
This activates maximum chilling perfor-
mance for the refrigerator. A fan icon
appears on the display. After 24 hours
the system is reset to the original setting
and the fan disappears. The fast cool
function can also be disabled before this
time by pressing the button manually
again. Once the fast cool function is
finished, the refrigerator automatically
defrosts.