Télécharger Imprimer la page

DeWalt DPD3000IC Guide D'utilisation page 11

Publicité

Les langues disponibles

Les langues disponibles

nozzle Color
spray Pattern
red
15˚
yellow
˚
25
Green
˚
40
White
low pressure
Black
* CAUTION: The high-pressure spray from your pressure washer
is capable of causing damage to surfaces such as wood, glass,
automobile paint, auto striping and trim, delicate objects such
as flowers and shrubs. Before spraying, check the item to
be cleaned to assure yourself that it is strong enough to resist
damage from the force of spray.
uses
surfaces*
powerful
metal or
pinpoint for
concrete;
very intense
DO NOT use
cleaning
on wood
intense
metal, concrete
cleaning of
or wood
small areas
intense
metal, concrete
cleaning of
or wood
larger areas
covers wide
metal, concrete,
areas of
wood or vinyl
cleaning
applies cleaning
metal, concrete,
solutions
wood or vinyl
ChanGInG nozzLes on sPray WanD
DANGER: Risk of fluid injection. Do not direct discharge stream
toward persons, unprotected skin, eyes or any pets or animals.
Serious injury will occur.
WARNING: Flying objects could cause risk of serious injury. DO
NOT attempt to change nozzles while pressure washer is running.
Turn engine off before changing nozzles.
1. Pull quick-connect coupler back and insert
nozzle.
2. Release quick-connect coupler and
twist nozzle to make sure it is secure in
coupler.
WARNING: Flying object could cause risk
of serious injury. Ensure nozzle is completely
inserted in quick-connect socket and quick-
connect snap ring is fully engaged (forward)
before squeezing gun trigger.
chemicals and cleaning Solvents
Applying chemicals or cleaning solvents is a low-pressure operation.
note: Use only soaps and chemicals designed for pressure washer
use. Do not use bleach.
to aPPLy CheMICaLs anD soLVents
1. Press chemical hose (S) onto barbed fitting
located near high pressure hose connection
of pump as shown.
2. Place the other end of chemical hose with
filter on it into the container holding chemi-
cal/cleaning solution.
note: For every 7 gallons (26.5 liters) of
water pumped 1 gallon (3.8 liters) of chemi-
cal/cleaning solution will be used.
11
S

Publicité

loading