geo-FENNEL FL 275HV-TRACKING Mode D'emploi page 41

EN
TRACKING FUNCTION
The laser plane is automatically centred to the receiver "on-grade" (automatic axis alignment).
The operation of the tracking function is possible with the laser receiver FR 77-MM TRACKING only.
Start the tracking process:
Press the "Channel / tracking" button at the receiver FR 77-MM TRACKING.
A double-beep tone of the laser and a blue LED light at the receiver are indicating that the tracking
mode has started.
The laser plane starts searching the "on-grade" position of the receiver.
A permanent beep tone is indicating that the laser plane reached an endpoint of the search angle range.
After reaching an endpoint the laser plane moves in the opposite direction to continue the searching
process.
After reaching "on-grade" the blue LED at the receiver stops blinking and the green LED lights perma-
nently.
This indicates that the tracking process is completed.
Receiver FR 77-MM TRACKING returns into normal reception mode.
Horizontal operation:
One axis (X or Y) in tracking mode, the other axis horizontal self-levelled.
TILT and VWS function can be combined with the tracking function.
Vertical operation:
Tracking function in both X and Y axis.
TILT and VWS function can be combined with the tracking function.
Please find further explanations and application examples for the tracking function starting on page 5.
41