EIBENSTOCK ETR 230 Notice Originale page 29

exposure. The declared vibration emission level represents the main
applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may
differ. This may significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also take into account
the times when the tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of
vibration such as: maintain the tool and the accessories, keep the hands warm,
organisation of work patterns.
Dust Protection
Dust from material such as paint containing lead, some wood species, minerals
and metal may be harmful. Contact with or inhalation of the dust may cause
allergic reactions and/or respiratory diseases to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic such as oak and beech dust
especially in conjunction with additives for wood conditioning (chromate, wood
preservative). Material containing asbestos must only be treated by specialists.
Where the use of a dust extraction device is possible it shall be used.
To achieve a high level of dust collection, use industrial vacuum cleaner
DSS 25/35/50 for wood and/or minerals together with this tool.
The work place must be well ventilated.
The use of a dust mask of filter class P2 is recommended.
According to our general terms of delivery for business dealings, suppliers have
to provide to companies a warranty period of 12 months for redhibitory defects
(to be documented by invoice or delivery note).
Damages due to natural wear, overstressing or improper handling are excluded
from this warranty.
Damages due to material defects or production faults shall be eliminated free of
charge by either repair or replacement.
Complaints will be accepted only if the tool is returned in non-dismantled
condition to the manufacturer or an authorized Eibenstock service centre.
Warranty
29