EIBENSTOCK ETR 230 Notice Originale page 19

Specifications
Cutting System ETR 230
Rated voltage:
Power input:
Order Number:
Frequency:
No-load speed:
Max. disc diameter:
Max. disc thickness:
Spindle connection:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Available accesories:
Diamond cutting disc Ø230mm
Industrial Vacuum Cleaner DSS 25 A
Industrial Vacuum Cleaner DSS 50 A
Industrial Vacuum Cleaner DSS 35 M iP
Content of Delivery
ETR 230 with suction hood, safety guard, diamond cutting disc, tool kit and
operating instructions in a case.
Application for Indented Purpose
The ETR 230 cutting system is intended for professional use.
It may only be operated when fully assembled according to the assembly
instructions.
With the fitted suction hood as well as the correct diamond cutting wheel, it is
designed for dry cutting concrete and masonry with a minimum of dust.
For the protection of both the user and the machine, an industrial vacuum with a
power rating of at least 1200W must be connected.
The supplied safety guard must be used when cutting with resin-bonded cutting
wheels as well as when rough grinding and brushing metals.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training
50 - 60 Hz
6500 rpm
230 mm
10 mm
Ø 22.2 mm
II
IP 20
about 7,5 kg
EN 55014 and EN 61000
Ordernumber:
19
230 V ~
2600 W
06812
37448
09915
09916
09919