DeWalt DWE402 Guide D'utilisation page 11

FIG. 1
DWE402, DWE402N, DWE402G, DWE4222, DWE4222N
J
E
I
DWE4214, DWE4224
J
B
I
D
H
K
A
C
DWE4222N
F
G L
COMPONENTS (Fig. 1)
WARNING: Never modify the power tool or any part of it. Damage
or personal injury could result.
A. Paddle switch
(DWE402, DWE402N,
DWE402G, DWE4222,
DWE4222N)
B. Slider switch
(DWE4214, DWE4224)
C. Lock-off lever
D. Spindle lock button
E. Spindle
F. Side handle
Motor
Be sure your power supply agrees with the nameplate marking.
Voltage decrease of more than 10% will cause loss of power and
overheating. D WALT tools are factory tested; if this tool does not
e
operate, check power supply.
INTENDED USE
These heavy-duty small angle grinders have been designed for
professional grinding, sanding, wire brush, and cut-off applications at
various work sites (i.e., construction sites).
The DWE4222N lanyard connection (L) is intended for use by
competent personnel, who are trained and knowledgeable regarding
working with tools in and around machinery and "at height".
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
9
G. Anti-lockup backing flange
H. Threaded locking flange
I. Type 27 Guard
(4-1/2" / 115mm)
J. Guard release lever
K. Lock-on button
(DWE402, DWE402G,
DWE4222)
L. Lanyard connection
(DWE4222N)