Mounting The Lens - Monacor Security TVCCD-462COL Mode D'emploi

3 Applications
The colour camera TVCCD-462COL is designed
for application in video surveillance systems. It is
equipped with a backlight compensation and an
automatic electronic shutter (to be switched
on/off via DIP switches). In addition, the camera
features an automatic white balance with two
operating modes available.
The camera is designed for CS-mount and
C-mount lenses. It is possible to use either a lens
with automatic iris control [AI ("auto iris") lens,
controlled by video signal or DC controlled] or a
lens with manual iris control. A 4-pole connector
plug for iris control is supplied with the camera.
4 Lens
4.1 Adjusting the camera to the lens
Set the switches according to the lens type used:
Lens type Selector switch
LENS (10)
AI lens controlled position
by video signal "VIDEO"
position
DC controlled AI lens
"DC"
Lens with fixed iris or any
manual iris control position

4.2 Mounting the lens

1) Remove the lens cover (1).
2) When using a C-mount lens, screw it on the
C-mount adapter ring (2). When using a CS-
mount lens, remove the adapter ring and
directly screw the lens on the threaded ring
(3).
GB
Central DIP
switch (5)
position "OFF"
position "OFF"
position "ESC"
13