Commissioning; Before Switching On - Lenze E82ZAFAC001 Instructions De Montage

5

Commissioning

Before switching on

5 Commissioning
Before switching on
)
Note!
If your configuration differs from the Lenze settings, please read the
ƒ
instructions given under "Individual settings".
Please observe
ƒ
– that the jumpers can only be plugged when the device is switched off.
– that the jumpers at the function module are set correctly.
– that C0034 matches the jumper setting
Example: Bipolar setpoint selection (−10 ... +10 V) via X3.1/1U
ð
32
C0034/1 = 1, jumper in position "7 − 9"
^ 33
l
^ 35
^ 33
EDK82ZAFAC−001 DE/EN/FR 6.0