Charger And Battery - iKarus Lama Manuel D'utilisation

Masquer les pouces Voir aussi pour Lama:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Features of the Charger:
-
For more accuracy, safety and reliability a micro processor in the
Charger monitors the entire
charging process.
-
This Charger charges 2 (7.4V) and 3 (11.1 V) cell Lithium-Ion and
Lithium-Polymer batteries.
-
The charging status is displayed via LEDs
-
Auto-detection of voltage differences between cells ensures maximum
capacity and life span of your batteries.
-
Input jack: DC 15-18 V, 1000 mA
Attention: Important Safety Rules:
-
We recommend an old metal ammunition container for storage and
charging of Li-Ion and Li-Po batteries.
-
Never leave batteries in your model. Store them properly.
-
Use this charger for 2 and 3-cell Li-Ion and Li-Po batteries only.
-
Never disassemble, alter or use the charger for other than the design
purpose.
-
Never charge a battery immediately after the flight. Let it cool down first.
Otherwise the battery will be damaged or destroyed. It may catch fire or
even explode!
-
Never charge a battery which has changed its shape or has a "puffed
up" cell. This indicates a damaged battery and it may short circuit itself,
catch fire or even explode.
-
Never charge near a heat source or electronic equipment.
-
Never charge in direct sun shine or inside a car.
-
Never leave the battery unattended during charge process.
-
Never let the charger get wet nor use it under moist conditions to avoid
short circuitry and other hazard as described before.
-
Never pour liquids onto the charger or let foreign objects get into the
charger. In such a case, immediately cut off the power source, dis-
connect the battery and return the charger to your local hobby shop or
send it direct to us for service.
-
Always place the charger and battery on a flat, non-flammable surface.

Charger and Battery

25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

6991001

Table des Matières