Safety Instructions - Scheppach HC50Si Traduction Des Instructions D'origine

The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufac-
turer will be liable for any damage or injuries of any
kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Safety instructions

m Attention! The following basic safety measures
must be observed when using electric tools for pro-
tection against electric shock, and the risk of inju-
ry and fire. Read all these notices before using the
electric tool and keep the safety instructions for later
reference.
Service and maintenance
1. Regular cleaning, maintenance and lubrica-
tion. Always pull the electrical plug before any
adjustment, maintenance or repair.
2. Have your device repaired only by qualified
experts and only with original replacement
parts. This ensures the continued safety of the
device.
Working safely
1. Keep your work area orderly
A messy work area can cause accidents.
–
2. Consider environmental influences
Do not expose electric tools to rain.
–
Do not use electric tools in damp or wet envi-
–
ronments.
Keep the work area well lit.
–
Do not use electric tools where there is a risk of
–
fire or explosion.
3. Protect yourself from electric shock
Avoid physical contact with earthed parts (such
–
as pipes, radiators, electric stoves or cooling
devices).
4. Keep other people away
Do not let other people — especially children —
–
touch the electric tool or its cable. Keep them
clear of the work area.
5. Store electric tools safely when they are not in use
– Unused electric tools should be kept in a dry,
high or closed area, out of reach of children.
6. Do not overload your electric tool
Work is better and safer within the performance
–
range indicated.
7. Use the right electric tool
Don't use low-performance machines for heavy-
–
duty jobs.
Do not use the electric tool for purposes for
–
which it was not intended. For example, do
not use a portable circular saw for cutting tree
branches or logs.
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
8. Wear proper clothing
Do not wear loose clothing or jewellery, as they
–
can get caught in moving parts.
– When working outdoors, wear slip-resistant
shoes.
Wear a hairnet over long hair.
–
9. Use protective gear
Wear safety glasses.
–
Wear a breathing mask during work that cre-
–
ates dust.
10. Connect the dust extraction equipment
If there are connections to dust extraction and
–
collection equipment, make sure that they are
connected and properly used.
11. Do not use the cable for purposes for which it
was not intended
– Never use the cable to pull the plug from the
socket. Protect the cable from heat, oil and
sharp edges.
12. Secure the work piece
Use clamps or a vice to hold the work piece
–
firmly. They will hold it more securely than your
hand can.
13. Avoid abnormal postures
Make sure to stand securely and always keep
–
your balance.
14. Maintain your tools with care
For better and safer work, keep cutting tools
–
sharp and clean.
– Follow the instructions for lubrication and
changing tools.
Regularly inspect the electric tool's connection
–
cable, and if it is damaged, have it replaced by
an authorized expert.
Regularly check extension cords, and replace
–
them if they are damaged.
– Keep the handles dry, clean and free of oil and
grease.
15. Pull the plug from the socket
When not using the electric tool, before main-
–
tenance or when changing tools, such as saw
blades, drills and cutting bits.
16. Do not leave any tool keys inserted
– Before switching on, check to see that keys and
adjustment tools have been removed.
17. Avoid unintentional activation
When plugging the tool in, make sure that the
–
switch is turned off.
18. Use outdoor extension cords
– When outdoors, use only extension cords that
are approved and appropriately marked.
19. Be alert
Pay attention to what you do. Approach your
–
work sensibly. Do not use the electric tool when
you are distracted.
20. Check the electric tool for damage
– Before using the electric tool, you must inspect
safety equipment or slightly damaged parts care-
fully to ensure that they work properly and as in-
tended.
GB 83