Before Proceeding; How To Use This Manual - Pioneer PDP-5004 Mode D'emploi

Before Proceeding

How to Use This Manual

This manual is set up to follow the course of actions and
operations in the order that would seem most logical for
someone setting up this unit.
Once the unit has been taken out of the box and it has
been confirmed that all the parts have been received
(page 4), it may be beneficial to look over the section
"Part Names and Functions" starting on page 5 to
become acquainted with the plasma monitor and remote
control unit, as their respective buttons and controls will
be referred to throughout this manual.
The section "Installation and Connections" starting on
page 11 covers all the necessary points regarding
installation of the plasma display and connections to a
wide variety of components.
The section "System Settings" starting on page 20
covers the on-screen settings necessary for correct
operation of the plasma display with its connected
components. Depending on the connections made, this
section may or may not be necessary.
The remainder of the sections in this manual is dedicated
to the basic operations associated with selecting a source
component up to the more complex operations
associated with adjusting the plasma display picture to
match the requirements of specific components and
personal preferences.
Apple and Macintosh are registered trademarks of Apple Computer, Inc.
Microsoft is a registered trademark of Microsoft Corporation.
NEC and PC-9800 are trademarks of NEC Corporation.
VESA and DDC are registered trademarks of Video Electronics Standards Association.
Power Management and Sun Microsystems are registered trademarks of Sun Microsystems, Inc.
VGA and XGA are registered trademarks of International Business Machines Co., Inc.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC.
TMDS is registered trademark of Silicon Image Inc.
This product includes FontAvenue
trademark of NEC Corporation.
For U.S. Model
2
EN
®
fonts licensed by NEC Corporation. FontAvenue is a registered
Regarding menu displays
The example menu displays provided in this manual are
those for the PDP-5004/PDP-5014 models. The PDP-4304/
PDP-4314 displays differ as shown:
Example of PDP-5004/PDP-5014 Menu Display:
STANDARD
PICTURE SCREEN
:
CONTRAST
:
BRIGHTNESS
:
COLOR
:
TINT
:
SHARPNESS
:
MPEG NR
:
DNR
:
CTI
:
COLOR TEMP.
PICTURE RESET
ENTER
SET
Example of PDP-4304/PDP-4314 Menu Display:
STANDARD
PICTURE SCREEN SETUP
:
CONTRAST 0
:
BRIGHTNESS 0
:
COLOR 0
:
0
TINT
:
SHARPNESS 0
: O N
MPEG NR
: M I D
ONR
: O N
CTI
: M I D
COLOR TEMP.
PICTURE RESET
ENTER
SET MENU
Please note that the actual contents displayed are the
same for both the PDP-5004/PDP-5014 and PDP-4304 /
PDP-4314.
INPUT1
SETUP OPTION
0
0
0
0
0
ON
MID
ON
MID
EXIT
MENU
INPUT1
OPTION
EXIT