Pioneer PDP-5004 Mode D'emploi page 11

[PDP-5014, PDP-4314]
1
2
3
4
5
6
7
When handling the remote control unit
¶ Do not drop the remote control unit or expose it to
moisture.
¶ Do not use the remote control unit in a location subject to
direct sunlight, heat radiation from a heater, or in a place
subject to excessive humidity.
¶ When the remote control unit's batteries begin to wear out,
the operable distance will gradually become shorter. When
this occurs, replace all batteries with new ones as soon as
possible.
1
SCREEN SIZE button
Press to select the screen size (pages 27 to 28).
2
INPUT buttons
Press to select the input (page 25).
3
MENU button
8
Press to open and close the on-screen menu
9
(pages 20 to 41).
4
0
ADJUST (5/∞/3/2) buttons
Use to navigate menu screens and to adjust various
settings on the unit (pages 20 to 41).
5
SET button
Press to adjust or enter various settings on the unit
(pages 20 to 41).
6
AV SELECTION button
Press to switch to Picture settings.
(VIDEO mode: DYNAMIC, STANDARD, MOVIE,
GAME, USER
PC mode: STANDARD, USER)
7
MUTING button
-
Press to mute the volume (page 26).
8
AUTO SET UP button
When using computer signal input, automatically sets
the [POSITION], [CLOCK] and [PHASE] to optimum
values (page 33).
9
STANDBY/ON button
Press to put the unit in operation or standby mode
(page 25).
0
DISPLAY button
Press to view the unit's current input and setup mode
(page 26).
-
VOLUME (+/–) buttons
Use to adjust the volume (pages 25 and 26).
Part Names and Functions
7
EN