Maintenance - Elinchrom ZOOM Pro HD Manuel D'utilisation

User Manual
REFLECTOR ZOOM TABLE
REFLECTOR Ø
None
EN
Reflector 18 cm 60°
Reflector 21 cm 50°
Reflector 26 cm 43°
Hot spot
ZOOM FLASHHEADS - MODELLING LAMPS FUSES
MOD- LAMP
(SOCKET GX 6.35)
POWER VOLTAGE EL-NR
150W 230VAC 23032
200W 230VAC 23034
300W 230VAC 23022
150W 120VAC 23031
200W 120VAC 23033
300W 120VAC 23030
12
EL-NO. HOT SPOT WIDE
80° 81°
26144 60° 74°
26141 52° 63°
26137 42° 53°
Wide
FUSES
CURRENT REACTION
2 FAST «F»
2 FAST «F»
2.5 FAST «F»
2 FAST «F»
2 FAST «F»
5 FAST «F»

MAINTENANCE

The Zoom Head requires only very little maintenance. To ensure secure operation please
check the following points regularly before connecting the Zoom Head to the EL-power
pack:
• Ensure that the contacts of the flash head connector are not burned or corroded.
• The Zoom Head flash cable should not have any marks or cuts. LIFE-DANGER!!
• Ensure that the plug-in flash tube, the Halogen lamp and the glass dome are correctly
fitted.
• Do not use water to clean the Zoom Head from dust and dirt.
• Ventilation grids must be clean and free of any tape etc.
• When the Zoom Head is connected to the EL-power pack, check that the fan cooling is
active.
CAUTION:
Under no circumstances open any part of the equipment. The Zoom Head is not user
serviceable and there is dangerous high voltage. In the event of difficulties contact your
Elinchrom Service partner.
Regular check
National safety regulations require frequent safety checks of the electrical equipment. The
ZOOM Head should be checked once a year. This check not only guarantees safety, it also
protects the value of the unit.
Return To Customer Service
To achieve maximum protection of the unit when sending it in for service, the original
packaging should be kept.
Sales / Service / Rental
EL-NR
For service and sales, please contact your local Elinchrom Distributor. For more
(10 PCS)
information, contact and support, please visit http://www.elinchrom.ch/distrib.php
19032
19032
19033
19032
19032
19036
User Manual
EN
13