Declaration Of Conformity; Disposal And Recycling; Characteristics - Elinchrom ZOOM Pro HD Manuel D'utilisation

User Manual

DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
EN
1. This device may not cause harmful interference.
2. This device must accept any interference received, including
interference that may cause undesired operation.
Product name:
Trade name:
Model number(s):
Name of responsible party:
Phone:
Fax:
E-Mail:
Elinchrom Ltd hereby declares that the equipment bearing the trade name and model
number specified above was tested in accordance with the measurements procedures
specified in the standards & specifications listed above and that all the necessary steps
have been taken and are in force to assure that the production units of the same equipment
will continue to comply with the Commissions requirements.
CE MARKING
The shipped version of this device complies with the requirements of
EMC directives
(EMC 2004/108/EC) «Electromagnetic compatibility» and (Low voltage
2006/95/EC) «Low voltage directive».
4
ZOOM HEAD
ELINCHROM
Pro HD: 20192 Action: 20193 Pro: 20191
Elinchrom Ltd
Av. De Longemalle 11
CH - 1020 Renens / Switzerland
+41 21 637 26 77
+41 21 637 26 81
elinchrom@elinchrom.ch

DISPOSAL AND RECYCLING

This device has been manufactured to the highest standards from materials, which can
be recycled or disposed of in a manner that is not environmentally damaging. The device
may be taken back after use to be recycled, provided that it is returned in a condition
that is the result of normal use. Any components not reclaimable will be disposed of in an
environmentally acceptable manner.
If you have any question on disposal, please contact your local office or your local
ELINCHROM Agent (please visit our website for a list of all ELINCHROM agents worldwide).

CHARACTERISTICS

Three versions; ZOOM PRO HD, ZOOM ACTION and ZOOM PRO
•
• ZOOM function for flash tube and halogen modelling lamp.
• The ZOOM function is available from the left and right housing side
• ZOOM angle 50° to 66°, with 21 cm Reflector // 26141
• Up to 3000 ws maximum flash power, for the ELINCHROM power pack range.
• Up to 300 W halogen modelling lamp.
• High quality 5 m flash cable for maximum power and flexibility, also available as
Flashhead Extension cable in 5 m and 10 m.
• Reliable, high quality plug-in flash tube included.
• Protection glass dome included.
• Halogen lamp on/off switch.
• Centred umbrella fitting (7 mm).
• Extra umbrella fitting for other umbrella shaft sizes.
• Intelligent low noise fan cooling system. Electronically controlled the fan spins slower
or faster depending on the internal temperature of the head.
• Large handle with rubber grip.
• Small, robust and lightweight housing.
User Manual
EN
5