Introduction; Intended Use; Features - Parkside PWSA 20-Li A1 Traduction Des Instructions D'origine

CORDLESS ANGLE GRINDER
PWSA 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operasting and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The appliance is intended for cutting, rough cutting
and brushing metal, concrete or tiles without the use
of water. Any other usage or modification of the
appliance is deemed to be improper and carries a
significant risk of accidents. The manufacturer accepts
no responsibility for damage(s) resulting from
improper usage. The appliance is not intended for
commercial use.
Explanation of the symbols used:
Before using the appliance for
the first time, read the original
operating manual and safety
instructions.
Using damaged cutting or rough
grinding discs is dangerous and
may cause serious injury!
Diameter of the disc
Cordless angle grinder
Wear protective goggles!
Wear ear protection!
│ GB │ IE
■ 20
Wear safety shoes!
Wear protective gloves!
Wear dust mask!
Not approved for wet grinding
Not approved for side grinding
Suitable for grinding metal

Features

Appliance handle
Battery charge level button
Battery display LED
ON/OFF switch
Safety lock-out
Battery pack*
Release button for battery pack
Additional handle
Blade guard
Spindle locking button
Screw thread (3 x) for the additional handle
Clamping lever
Coding pin
Adjusting nut
High-speed charger* (see fig. A)
Red charge control LED (see fig. A)
Green charge control LED (see fig. A)
Clamping nut (see fig. C)
Attachment spindle (see fig. C)
Attachment flange (see fig. C)
Coding groove (see fig. C)
Two-hole mounting spanner (see fig. D)
PWSA 20-Li A1