Publicité
Les langues disponibles
Les langues disponibles
Mise en service et fonctionnement
4.7.2.3.4.1
4.7.2.3.4.2
4.7.2.3.5
4.7.2.3.6
4.7.2.3.7
4.7.2.4
Refresh
4.7.3
Offline Menu Structure
Off line
1 O f fli ne
1 N ew C onf igurat ion
2 O nline
3 Frequency D evi ce
2 Sav ed C onf iguration
4 U til ity
4-34
MPIP sarl - 94, rue Mohamed Tounsi - 16013 - ROUIBA - ALGERIE
Tél./Fax : 021 81 11 22 - GSM : 070 91 75 15 ou 072 900 654 - E-mail : mpip@mpi-dz.com
Status
Information on the status of the device.
Test
A self--test of the transformer can be started, the local display of the
transformer and the current supply can be tested, and the device can
be reset.
Device information
This menu contains information on the manufacturer, model and order
number of the transformer. In addition, the measurement position
designation (TAG), the device description and a message can be
selected. The last configuration is noted, local operation enabled or
locked and the write protection enabled, the assembly number selected
and the revision numbers noted.
Calibrate
Used to calibrate the sensors. A description can be found in the
Operating Instructions in section 4.3.7 Menu Structure Calibration
(CAL).
HART
In the HART sub--menu, the callup addresses of the connected
transformers and the number of the preambles to be received and
transmitted are set.
Selection of this menu point will cause all parameters to be
retransmitted from the field device to the communicator.
Manuf act ur er
Model
1 Si em ens
1 SI PA N LF
Sav ed Confi guration
1 Module C ont ent s
2 data pack C ont ent s
Fld dev rev .
U nnam ed
1 Dev v1, DD v 1
F
rom Blank Template
1 Mark all
2 Unmar k al l
3 Edit individually
4 Sav e as .. .
Dispositif de mesure de conductivité SIPAN 32
C79000-B5477-C045-02
(Eins tellbare
aramet er siehe
For adjustable parameters see
K apit el 1)
1. 1. 1. 1
section 4.7.1.1.1..1
.
S av e as. ..
1 Locat ion
2 N ame
3 D ata T ype
Publicité
Chapitres
