Publicité
Les langues disponibles
Les langues disponibles
Operating the HART Communicator
4.7
4.7.1
Offline
4.7.1.1
New Configuration
4.7.1.1.1
4.7.1.1.1.1
4.7.1.1.1.1.1
4.7.1.2
Saved Configuration
Dispositif de mesure de conductivité SIPAN 32
C79000-B5477-C045-02
MPIP sarl - 94, rue Mohamed Tounsi - 16013 - ROUIBA - ALGERIE
Tél./Fax : 021 81 11 22 - GSM : 070 91 75 15 ou 072 900 654 - E-mail : mpip@mpi-dz.com
This menu is used to create a configuration for the transformer, without
this being necessarily connected to the HART
communicator.Depending on which DD is loaded, devices from one or
more manufacturers can be selected.
Siemens
The device type is selected.
SIPAN LF
The field device revision is selected.
Dev v1, DD v1
When this menu is called--up, a standard configuration is automatically
created.
With Mark all, all parameters to be transmitted are marked
Unmark all unmarks the parameters.With Edit individually, the
parameters can be changed sequentially and marked for
transmission.Adjustable parameters are: measurement designation
(TAG), description, message, last config., set number, current
measurement range (see section 4.7.2.3.3.1 Select Sets), unit,
temperature unit, current characteristic, 4 mA value, 12 mA value, 20
mA value, T90 time, TD time, range D, dead time, temperature
compensation, reference temperature, characteristic temperature
curve, TC value, upper limit, lower limit, hysteresis, upper temperature
limit, lower temperature limit, temperature hysteresis, output 2
available?.
A detailed description of the parameters can be found in section 4.3.6
of the Operating Instructions
Save as enables the created configuration to be saved under any name
in the storage module or data pack.
A previously created configuration can be edited, copied, transmitted,
printed, deleted, renamed, or compared with another configuration.
Mise en service et fonctionnement
4-31
Publicité
Chapitres
