Handing Over To The Owner; Adapting To A Different Type Of Gas - Vaillant atmoMAG mini 11-0/0 XI Manuel D'utilisation

6.4

Handing over to the owner

i
When you have finished the installation,
attach the sticker supplied (835593) to the
appliance in the user's language.
The owner of the appliance must be instructed on the
function and operation of his gas instantaneous water
heater.
>
Show the customer how to use the appliance. Go
through the operating manual with him and answer
any questions he has.
>
Hand over any instruction manuals meant for him, as
well as the appliance documents.
>
Tell the owner that you have noted the appliance
type and the gas type used in table 10.2, with refer-
ence to the set gas type in section 10, Technical data.
>
Tell the owner about any measures taken to ensure
the combustion air supply and flue gas extraction,
making it very clear that they may not be altered.
>
Draw special attention to the safety instructions
which the owner must follow.
>
Instruct the owner on the need for regular inspection
and maintenance of the system. Recommend that he
signs an inspection and maintenance contract.
>
Tell the owner to keep the instruction manuals near
the gas instantaneous water heater.
>
Make it very clear to the owner that any changes to
the room where the appliance is installed may only be
made after consulting a specialist company.
Installation manual atmoMAG mini 11-0/0 XI 838291_05
6.5

Adapting to a different type of gas

a
Danger!
Risk of poisoning due to wrong type of gas!
Incomplete combustion may result in carbon
monoxide poisoning. Using incorrect burner
nozzles may allow gas to escape into the
installation room, resulting in poisoning.
>
Operate the unit with the permitted type of
gas.
>
Only use genuine Vaillant conversion kits
to convert the unit to a different type of
gas.
a
Danger!
Risk of death!
If unsuitable burner nozzles are used, any
malfunctions that occur may cause gas to
escape, thereby presenting a risk of death.
>
The unit must only be converted to a dif-
ferent type of gas using the conversion kits
available from the manufacturer.
If the type of gas changes, the appliance must be con-
verted to the available gas type. Certain parts of the
appliance must be modified or replaced.
These modifications and the new settings they require
may only be carried out by a qualified engineer in
accordance with the applicable national standards.
You can easily perform the modification if you follow
the instructions and use the gas conversion kits sup-
plied by Vaillant.
Initial operation 6
INT 17
EN