Cleaning And Descaling; Descaling - Boneco U350 Mode D'emploi

CLEANING AND DESCALING

DESCALING

If stubborn limescale deposits form at the bottom
of the BONECO appliance, the appliance must also
be descaled in addition to the cleaning. For this pro-
cess, use the provided "EZCal" descaling agent. You
can get replacement parts at your BONECO special-
ist dealer or at the online store under www.shop.
boneco.us
1. Disconnect the BONECO appliance from the pow-
er outlet.
The unit must always be unplugged from the
power outlet before draining it. Failure to do
so can result in electric shock and pose the risk of
severe or fatal injury!
2. Empty the water tank.
Tip the long side of the BONECO appliance
towards the sink (with the viewing window
facing down). This prevents water from getting into
the air outlet and damaging the unit.
3. Remove the A250.
4. Mix 1 bag of EZCal with 32 oz. (1 liter) of water
and pour the mixture into the water tank, one
half to the left and right each.
5. Wait 30 minutes to allow the solution to take ef-
fect.
6. Rinse the water tank with tap water. Remove re-
maining lime residue, if any, using a scrub brush.
7. Rinse the inside of the water tank with fresh tap
water.
8. Reinsert the A250.
19
en