Additional Safety Instructions - Parkside PKGA 20-Li B1 Traduction Des Instructions D'origine

6) SERVICE
a) Have your power tool ser-
viced by a qualified repair
person using only identi-
cal replacement parts. This
will ensure that the safety of the
power tool is maintained.
b) Never repair damaged
batteries. All battery repairs
should be carried out by the
manufacturer or authorised cus-
tomer service centres only.
Additional safety instruc-
tions
Warning! Sawing or
sanding can result in
the formation of haz-
ardous dusts (e.g. aris-
ing from materials with
paints containing lead,
materials containing as-
bestos, metals or some
wood types) which can
present a hazard to the
operator or persons in
the vicinity. Make sure
that the workplace is
well ventilated. Always
wear safety goggles,
safety gloves and res-
piratory protection. At-
tach a dust extraction
system.
1) SPECIAL SAFETY INFORMA-
TION FOR THE CORDLESS
COMBINATION TOOL
• Use the additional han-
dles delivered with the
appliance. The loss of control
can result in injuries.
• Hold the electric tool by
the insulated handle sur-
faces when performing
work where the cutting
tool or screw may come
into contact with hidden
wiring. Contact with a live
wire can also cause a charge
in metal parts of the appliance
and result in an electric shock.
• Use suitable detectors in
order to find hidden sup-
ply lines or ask the local
utility company. Contact
with electrical cables can lead
to electric shock and fire, con-
tact with a gas pipe can result
in an explosion. Damage to a
water pipe can lead to property
damaged and electric shock.
• Secure the workpiece. A
workpiece that is retained with
clamping appliances or a vice
is held more securely than with
your hand.
• Be very careful when han-
dling tools such as saws,
scraper blades and drills.
GB IE
37