Parkside PKGA 20-Li B1 Traduction Des Instructions D'origine page 36

GB IE
count the working condi-
tions and the work to be
performed. Use of the power
tool for operations different
from those intended could result
in a hazardous situation.
h) Keep handles and grip
surfaces dry, clean and
free from oil and grease.
Slippery handles and grip sur-
faces do not permit safe opera-
tion and control over the power
tool in unexpected situations.
5) CAREFUL HANDLING AND
USE OF BATTERY DEVICES
a) Charge the batteries
only in chargers that are
recommended by the
manufacturer. Risk of fire if
a charger that is suitable for a
specific type of battery is used
with other batteries.
b) In the power tools, use
only the batteries de-
signed for the purpose.
The use of other batteries may
result in injuries and risk of fire.
c) Keep the unused battery
away from paper clips,
coins, keys, nails, screws
and other small metal ob-
jects, which could cause
bridging of the contacts. A
short circuit between the battery
36
contacts may cause burns or
fire.
d) If used incorrectly, liquid
may leak from the bat-
tery. Avoid contact with
this. In the event of ac-
cidental contact, rinse off
with water. If the liquid gets
into eyes, seek medical assis-
tance. Leaking battery fluid may
cause skin irritations or burns.
e) Do not use damaged or
altered batteries. Damaged
or altered batteries can be
unpredictable and lead to fire,
explosion or risk of injury.
f) Do not expose batteries to
fire or elevated tempera-
tures. Fire or temperatures
over 130 °C can cause an ex-
plosion.
g) Follow all instructions
for charging and never
charge the battery or the
battery-powered tool
outside the temperature
range stated in the oper-
ating instructions. Incorrect
charging or charging outside
the permitted temperature range
may destroy the battery and in-
crease the risk of fire.