Parkside PKGA 20-Li B1 Traduction Des Instructions D'origine page 34

GB IE
e) When operating a power
tool outdoors, use an ex-
tension cord suitable for
outdoor use. Use of a cord
suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool
in a damp location is una-
voidable, use a residual
current device (RCD) pro-
tected supply. Use of an
RCD reduces the risk of electric
shock.
3) PERSONAL SAFETY
CAUTION! The following
states how to avoid accidents
and injuries:
a) Stay alert, watch what
you are doing and use
common sense when
operating a power tool.
Do not use a power tool
while you are tired or un-
der the influence of drugs,
alcohol or medication. A
moment of inattention white op-
erating power tools may result
in serious personal injury.
b) Use personal protective
equipment. Always wear
eye protection. Protective
equipment such as dust mask,
non-skid safety shoes, hard hat,
34
or hearing protection used for
appropriate conditions will re-
duce personal injuries.
c) Prevent unintentional
starting. Ensure the switch
is in the off-position be-
fore connecting to power
source and/or battery
pack, picking up or car-
rying the tool. Carrying
power tools with your finger on
the switch or energising power
tools that have the switch on
invites accidents.
d) Remove any adjusting
key or wrench before
turning the power tool on.
A wrench or a key left attached
to a rotating part of the power
tool may result in personal in-
jury.
e) Do not overreach. Keep
proper footing and bal-
ance at all times. This ena-
bles better control of the power
tool in unexpected situations.
f) Dress properly. Do not
wear loose clothing or
jewellery. Keep your hair,
clothing and gloves away
from moving parts. Loose
clothes, jewellery or long hair
can be caught in moving parts.
g) If dust extraction and
collection devices can be
installed, make sure that