Gmeans Of Joining; Hloading Of Cartridge Wedges - Cassese MACH 45 UNI Mode D'emploi

USER MANUAL
4.G MEANS OF JOINING
Thanks to the color code, you can recognize easily the type of wedges. The hard wood
wedges can be recognized by the red glue on top of the stick, white color will indicate
soft wood wedges.
Cassese wedges can also be supplied in MDF type dedicated to MDF or very hard wood
use.Please contact your local agent to try them.
It is recommended to use the proper type of wedges for joining, always using hard wood wedges in
all your frame will result in poor tightening of the corner when the wood is soft. A first approach
consists in trying to scratch the wood with your nails, if you can scratch it easily, then a soft wood
wedge should do the job perfectly and you will get the best tightening.
4.H LOADING OF CARTRIDGE WEDGES
To load the machine,
rotate the loading
button in the load
position.
The wedge pusher
will move back to
allow you to
introduce the
cartridge.
Load the strip of
wedges and turn
back the loading
button to off.
Pay attention to the
way the wedges are
introduced.
Figure 4-21
Figure 4-23
MACH 45 UNI
Figure 4-20
Figure 4-22
19