Hresetting The Maintenance Alarm; Ilubricating The Horizontal Columns - Cassese MACH 45 UNI Mode D'emploi

USER MANUAL
7.G UNJAMMING THE MACHINE
In case a wedge is jammed in the distribution head, follow the procedure bellow to unjamm the machine:
-I.7.A SAFETY INSTRUCTIONS
-I.7.C REMOVING THE DISTRIBUTOR HEAD (page 43)
-I.7.D OPENING THE SIDE PANELS (page 43)
-I.7.E REMOVING THE HAMMER (page 44)
-I.7.FLUBRICATING THE DISTRIBUTOR HEAD (page 44)
7.H RESETTING THE MAINTENANCE ALARM
From the execution
menu, press MAIN
button to return the
main menu and
select SETTING
button.
Press the RAZ NAILS
ALARM button , a
keyboard asking for a
code will come up.
7.I LUBRICATING THE HORIZONTAL COLUMNS
Allen Key N.3
Clea n cloth with lubricant spray such as WD40
Engine car oil
Refer to chapter I.7.A SAFETY INSTRUCTIONS(page 42) for safety instructions.
Remove the side panel as explained in the chapter I.7.D O PENING THE SIDE PANELS
(page 43)
Clean with clean cloth the 2 horizontal columns and apply some engine car oil on
them.
(page 42)
Never push with your finger on a protruding wedge, they are very sharpened!!!
Figure 7-15
Enter the code 5000
to reset the alarm
message.
MACH 45 UNI
Figure 7-14
Figure 7-16
45