Cleaning - Bartscher A150421 Mode D'emploi

4. Now turn the control dial (9) to
the very left and set it to
„Zündpunkt/Ignition" position until
you hear the click-sound of the
safety pilot.
5. In case the safety pilot is not engaged
you should repeat the process.
6. Afterwards set the control dial (9) to
the required/desired position.
CAUTION!
In case you hear a „fizzling" sound this means the cartridge is not arrested
correctly. Correct the position of the cartridge if necessary.

6. Cleaning

o Before and after every use the cooker should be cleaned thoroughly.
o Set the control dial (9) to Aus/Off position.
o Set the cartridge locking lever (10) to Aus/Off position.
o In case of need the cartridge locking lever (10) may be set directly to Aus/Off position.
o Remove the cartridge (6) from the cartridge slot (7).
o Wipe the inside and outside of the device with a damp cloth.
o You may never dunk the device into water or other liquids.
o Use soft cloth only and make sure you never use any kind of abrasive agents or
pads, which could scratch the surface.
o Do not use any kind of agents containing alcohol at any time.
- 19 -