Cleaning And Maintenance; Safety Advice; Cleaning - Bartscher IK 30TC Mode D'emploi

CAUTION!
Do not place empty cookware on the cooking surface.
Heating an empty pot or pan will activate the overheating protection mechanism, a
signal will sound and the device will turn itself off.
The LED will display the error message "E05".
If this occurs, disconnect the device from the outlet and leave it for a few minutes
to cool. After a few minutes the device will operate again without difficulties.
•
Be careful so that the bottom of cookware does not scratch the cooking surface, even
though scratches on the surface do not adversely affect the use of the device.
•
After cooking or heating has finished, remove the plug from its socket (do not
solely depend on the device to recognize the absence of cookware)!

6. Cleaning and maintenance

6.1 Safety advice

o Before beginning with repair or cleaning works make sure the device has been
disconnected from power socket (pull the power plug!!!) and has cooled down.
o Do not use any acid agents and make sure no water ingresses the device.
o To protect yourself from electric shock, never immerse the device, its cables and the
plug in water or other liquids.
CAUTION!
The device is not suited for direct washing via water jets. Therefore, you must not
use any kind of pressure water jet for cleaning the device!

6.2 Cleaning

o Clean the device after each use.
o Wipe the cooking surface, service panel and casing with a soft, damp cloth with a
mild, non-abrasive cleaner.
o Use only a soft cloth. Never use abrasive pads that could scratch the surface.
o Do not use any aggressive cleaning agents containing gasoline or solvents as well
as sharp, pointy objects to clean the device.
o After washing the device use a soft, dry cloth to dry and polish the surface.
- 30 -