Operating - Bartscher IK 30TC Mode D'emploi

•
The device is not adaptable for use with an external timer or remote control.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
The device should be placed in an area with easy access to the plug, in order to
quickly remove it from the socket if necessary.

5.5 Operating

•
Connect the device to a grounded single outlet. A signal sounds. The device is in
Standby mode.
•
Place a suitable cookware with food in the middle of the cooking surface.
•
If the cooking surface temperature is below 50° C, the display shows "- L-", when the
cooking surface temperature is higher than 50° C "- H-" appears on the display.
•
To turn on the induction cooker press ON / STANDBY
Messages on the LED display will disappear. The STANDBY mode light flashes.
•
The LED power and temperature indicator lights turn on. The device is ready for the
selected function.
NOTE!
If within 30 seconds after pressing the
device automatically switches to the STANDBY mode.
NOTE!
To simmer or cook food (max temperature of 170° C), select one of the power
levels (1-10).
To bake or fry in deep fat (max. temperature 240° C ) select one of the temperature
ranges (60-240° C).
1. Power regulation
Press the
The preset power level "5" is displayed and the device turns on.
The STANDBY mode light is lit.
With the
(1500 - 3000 W).
Range 1 corresponds to 1500 W and range 10 corresponds to 3500 W of power.
The power level remains displayed on the LED display and the
light is lit.
- 28 -
button once.
or button you can change at any time the setting in the range of
.
button no settings are selected, the
LED control