Accessories - IKA AOD 1.1 Mode D'emploi

Accessories

Venting handle
Quartz crucible
Ignition wire
Cotton threads
Gelatin capssules
Acetobutyrate capsules
Benzoic acid (NBS)
Benzoic acid
Benzoic acid tablets
Combustion bags 40x35
Combustion bags 70x40
Oneway crucible
Foundation
Other accessories can also be found in our IKA-Catalogue. The
adress is included on the back of these operating instructions.
Use of oneway crucible
For the decomposition vessels AOD 1.1 are oneway crucibles C14
ease and shorten the preparation of combustion. They consist of
a transparent plastik which burns completely to CO
Advantages:
• The sample can be directly weighted in the oneway crucible.
• The weight of the oneway crucible C14 can be delivered from
the weighing-machine to the calorimeter for the caculate the
foreign energy.
• There's no more need for an cotton thread.
• The one way crucible C14 is a burning help. Samples burning
incomplete in normal crucibles are burned better with the one
way crucible C14. Thgere by better measuring results are rea-
ched.
16
C 7010.8
C 4
(5 pieces) C 5012.3
(500 pieces) C 710.4
(100 pieces) C 9
(100 pieces) C 10
(30 g) C 43
(100 g) C 43A
(50 pieces) C 723
(100 pieces) C 12
(100 pieces) C 12A
C 14
C 5010.4
and H O.
2 2
Replacing of the crucible holder
For the use of the oneway crucible
C14 the decomposition vessels
foundation C 5010.4.
This foundation C 5010.4 replaces
the normal crucible holding.
Take thecover part and until the ignition
C 5010.4
Installation of the oneway crucible C14
The oneway crucible C14 must
C5010.4
AOD 1.1 must be put in the
wire on the crucible holder like
discribed before.
Screw down the cru-
cible holder from the
shaft and replace it with
the foundation
C 5010.4.
be put into the crucible holding
of the foundation C 5010.4 so
that the ignition wire touches
the oneway crucible C14.
It would the best to stick it
under the ignition wire.
C14