Maintenance And Cleaning; Accessories - IKA T 65 D ULTRA-TURRAX Mode D'emploi

The Poly-V-belt should be retightened after about
50 operating hours. To do this, proceed as fol-
lows:
ATTENTION!
1. Slacken off the four hexagon head bolts near
the motor using a 13 mm a/f wrench.
2. Pull the motor in direction F with a force of
about 100 N, as shown in the diagram.
3. Retighten the bolts whilst still applying the
force.
Apart from this, the T 65 D ULTRA-TURRAX
rates maintenance-free.
Spare parts order
When ordering spare parts, please give:
- Machine type
- Manufacturing number, see type plate
- Item and designation of the spare part, see
www.ika.com, spare parts diagram and spare
parts list
T 653
SI 400
SI 474
S 65 KG-HH

Maintenance and cleaning

ope-
®

Accessories

Telescopic stand
Safety limit switch
Support holder
Shaft
Repair
In case of repair the device has to be cleaned
and free from any materials which may constitu-
te a health hazard.
If you require servicing, return the appliance in
its original packaging. Storage packaging is not
suffi cient. Please also use suitable transport pa-
ckaging.
Only clean IKA appliances using these IKA
®
approved cleaning agents:
Dirt Cleaning agent
Dyes Isopropanol
Building materials Water containing
detergent,
Isopropanol
Cosmetics Water containing
detergent,
Isopropanol
Food Water containing
detergent,
Fuels Water containing
detergent,
Other materials Please consult IKA
- Wear protective gloves when cleaning the de-
vices.
- Do not place electrical appliances into the
cleaning agents for cleaning purposes.
- Do not allow moisture to get into the appliance
when cleaning.
- Please consult IKA before using any cleaning
®
or decontamination methods, other than tho-
se recommended here.
S 65 KG-HH-G 65 G Dispersion tool coarse
S 65 KG-HH-G 65 M Dispersion tool medium
S 65 KG-HH-G 65 F Dispersion tool fi ne
®
®
25