Cleaning Agent; Note To The Flat Key And Shaft Key; Accessories; Permitted Dispersing Tools - IKA T 10 basic ULTRA-TURRAX Mode D'emploi

Dirt

Cleaning agent

Dye isopropyl alcohol
Construction material water containing tenside/ isopropyl alcohol
Cosmetics water containing tenside/ isopropyl alcohol
Foodstuffs water containing tenside
Fuel water containing tenside
For materials which are not listed, please request information from
IKA application support.
Wear protective gloves during cleaning the instruments.
Electrical instruments may not be placed in the cleansing agent for
the purpose of cleaning.
Do not allow moisture to get into the instrument when cleaning.
Before using another than the recommended method for cleaning
or decontamination, the user must ascertain with IKA that this
method does not destroy the instrument.
Dispersion tools:
Please refer to the manuals associated to the dispersion tools.
Spare parts order
When ordering spare parts, please give:
- machine type
- manufacturing number, see type plate
- item and designation of the spare part, see www.ika.com,
spare parts diagram and spare parts list.
Repair
In case of repair the device has to be cleaned and free from
any materials which may constitute a health hazard.
For repair, please request the "Decontamination Certificate"
form IKA or use the download printout of it from IKA website:
www.ika.com.
If you require servicing, return the appliance in its original packag-
ing. Storage packaging is not sufficient. Please also use suitable
transport packaging.

Note to the flat key and shaft key

The provided assembly tools (flat key and shaft key, Fig. 4) can
be used to disassemble and assemble the dispersing elements for
cleaning and maintenance. Take the information about the exactly
use of the operating instructions of the dispersion tools.

Accessories

• R 104 Stand
• R 1825 Plate stand
• R 1826 Plate stand
• R 1827 Plate stand
• R 182 Cross sleeve
• H 44 Cross sleeve
17