Technical Data; Warranty - IKA T 10 basic ULTRA-TURRAX Mode D'emploi

Technical data

Speed range rpm
Speed display
Speed variation on load change %
Perm. ambient temperature °C
Perm. relative humidity %
Perm. on time (drive unit) min
Overload protection/blocking
protected
Protection to DIN EN 60529
Power consumption W
Power output W
Voltage VAC
or
Frequency Hz
Noise (without dispersing element) dB (A) 65
Drive dimension (W x D x H) mm
Clamp arm dimension (Ø x L) mm
Weight kg
Contamination level
Protection class
Overvoltage categorie
Operation at a terrestrial altitude m
Subject to technical changes!
8,000 - 30,000
(at nominal designed voltage and
50 Hz)
Scale (see speed table)
< 6
5 – 40
80
max. 10 ON/min. 5 OFF
locking bimetallic switch;
temperature and power sensitively
IP 30
125
75
220 - 240 (nominal design voltage 230V)
100 - 120 (nominal design voltage 115V)
50/60
56x66x178
8x100
0,5
2
II
II
max. 2000 above sea level

Warranty

In accordance with IKA warranty conditions, the warranty period
is 24 months. For claims under the warranty please contact your
local dealer. You may also send the machine direct to our works,
enclosing the delivery invoice and giving reasons for the claim. You
will be liable for freight costs.
The warranty does not cover wearing parts, nor does it apply to
faults resulting from improper use or insufficient care and mainte-
nance contrary to the instructions in this operating manual.
19