17. With "Arrow down" go to the next steps and
check all connections as shown on display
18. Once on END CONFIGURATION display,
move with "Arrows up-down" to YES and
push
19. Push Prg Button and with "Arrows up-down"
write the PWD 0066 then push
20.Select
CONFIGURATION Driver A and move to the
page 5 of 11
21. Select RELAY CONFIGURATION and push
22. Move to DISABLED and confirm by pushing
23. Push
CONFIGURATION/SETTING
24. Select with "Arrows up-down" REGULATION
and move to page 1 of 11
14
with
"Arrows
"Esc"
to
leave
up-down"
the