6. Always at page 2 of 3, check that VALVE is
Carel ExV
7. Push the "Arrows up-down" to page 3 of 3,
select PROBE S1 and push
8. Push the "Arrows up-down" till select "ratiom.
0/45barg" then push
9. With "Arrows down" go to the next steps and
check all connections as shown on display
again
10. Once on END CONFIGURATION display,
move with "Arrows up-down" to YES and
push
11. Push Prg Button and with "Arrows up-down"
write the PWD 0066 then push
10