Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
1. Basic safety information
Before first use, please read
the operating instructions
carefully. These provide
important safety informa-
tion and information concerning use
and maintenance of the tool.
This precision boring tool is designed for
finishing bores in metallic materials.
Specific information on the machining of
individual metallic materials is not the
subject of these operating instructions.
No other application is permitted and
could be dangerous. The manufacturer
cannot be held responsible for damage
or injury caused by improper use.
A damaged tool could endanger your
safety! Decommission the tool immedia-
tely and contact your suppliers.
This tool complies with the prescribed
safety regulations. Repairs must be
undertaken only by trained personnel.
Improper repairs can represent a con -
siderable risk for the user. Warranty
provisions can be implemented only
in the event that original Wohlhaupter
spare and accessory parts are used.
Keep the Operating instructions for use
in a safe place for future use.
2. Application and operation
The precision boring tools are de sign ed
for precision holes from 20 – 205 mm
(.787" – 8.071") diameter. The serie com-
prise of 10 single point boring tools
which can be equipped with insert hol-
2
ders
for different types of indexible
inserts.
8
3. Tool features
– manufactured from hardened and
ground alloyed case-hardening steel,
nickel plated, resp. aluminium
– on the spindle side, the tool is
desig ned with a Wohlhaupter-
connection
3
Fig. 1
– the tools are equipped with internal
coolant feed
(Fig. 2)
Fig. 2
– on the tool end, the tool is serrated for
both frictional and positive engage-
ment of insert holders taking various
types of indexible inserts
– in addition to the insert holders listed
1
,
in the standard range, we can also
supply additional holders for various
indexible insert sizes
– standard insert holders can be con -
verted to carry out back boring from
36 mm (1.417") bore diameters
3
(Fig. 1)
2
1
4
to the cutting edge
4
Publicité
Table des Matières
