Troubleshooting - Gaggenau AC250121 Manuel D'utilisation

Do not charge the batteries.
▶
Do not short-circuit the batteries.
▶
Do not throw batteries into a fire.
▶
ATTENTION!
Improper handling of batteries.
Do not short-circuit the terminals.
▶
Only use the specified type of batteries.
▶
Do not use different battery types together.
▶
Do not use new and used batteries together.
▶
Do not use rechargeable batteries.
▶
Leaking batteries may damage the remote control.
Remove the batteries if you are not using the re-
▶
mote control.
Safely dispose of empty or defective batteries in an
▶
environmentally friendly manner.
Remove the cover.
1.
11

Troubleshooting

You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
11.1 Malfunctions
Fault
The appliance is not working.
Remote control not working.
In the LED display, the LEDs
flash one to five times after the
appliance is switched off.
Cause & Troubleshooting
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your kitchen or other appliances are working.
▶
The batteries are flat.
→ "Replacing the batteries in the remote control", Page 34
▶
The batteries are almost empty.
→ "Replacing the batteries in the remote control", Page 34
▶
Remove the empty batteries.
2.
Insert the new batteries (3 V CR 2032).
3.
Close the cover.
4.
Dispose of the empty batteries in an environmentally
5.
friendly manner.
WARNING ‒ Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by trained specialist staff.
Troubleshooting en
35