Télécharger Imprimer la page

Milwaukee M12 Manuel De L'utilisateur page 5

Masquer les pouces Voir aussi pour M12:

Publicité

Les langues disponibles

Les langues disponibles

LIMITED WARRANTY
USA & CANADA
Every MILWAUKEE power tool* (see exceptions below) is warranted
to the original purchaser only to be free from defects in material and
workmanship. Subject to certain exceptions, MILWAUKEE will repair
or replace any part on an electric power tool which, after examination,
is determined by MILWAUKEE to be defective in material or workman-
ship for a period of five (5) years** after the date of purchase unless
otherwise noted. Return of the power tool to a MILWAUKEE factory
Service Center location or MILWAUKEE Authorized Service Station,
freight prepaid and insured, is required. A copy of the proof of purchase
should be included with the return product. This warranty does not
apply to damage that MILWAUKEE determines to be from repairs
made or attempted by anyone other than MILWAUKEE authorized
personnel, misuse, alterations, abuse, normal wear and tear, lack of
maintenance, or accidents.
Normal Wear: Many power tools need periodic parts replacement and
service to achieve best performance. This warranty does not cover
repair when normal use has exhausted the life of a part including,
but not limited to, chucks, brushes, cords, saw shoes, blade clamps,
o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and
bumper cover washers.
*This warranty does not cover Air Nailers & Staplers; Airless Paint
Sprayer; Cordless Battery Packs; Gasoline Driven Portable Power
Generators; Hand Tools; Hoist – Electric, Lever & Hand Chain;
M12™ Heated Gear; Reconditioned Product; and Test & Measure-
ment Products. There are separate and distinct warranties available
for these products.
**The warranty period for Job Site Radios, M12™ Power Port, M18™
Power Source, Jobsite Fan and Trade Titan™ Industrial Work Carts
is one (1) year from the date of purchase. The warranty period for
the M18 FUEL™ 1" D-Handle High Torque Impact Wrenches, Drain
Cleaning Cables, AIRSNAKE™ Drain Cleaning Air Gun Accessories,
REDLITHIUM™ USB Laser Levels and TRAPSNAKE™ 25' Auger
w/ CABLE DRIVE™ is two (2) years from the date of purchase. The
warranty period for the M18™ Compact Heat Gun, 8 Gallon Dust Ex-
tractor, M18™ Framing Nailers, M18 FUEL™ 1/2" Ext. Anvil Controlled
Torque Impact Wrench w/ ONE-KEY™, M18 FUEL™ 1" High Torque
Impact Wrench w/ ONE-KEY™, M18 FUEL™ 2 Gal. Compact Quiet
Compressor, M12™ Laser Levels, 165' Laser Detector, M12™ 23GA
Pin Nailer, M18 FUEL™ 1/4" Blind Rivet Tool w/ ONE-KEY™, M12
FUEL™ Low Speed Tire Buffer, and the M18 FUEL™ Dual Action
Random Orbital Polishers is three (3) years from the date of purchase.
The warranty period for the LED in the LED Work Light and the LED
Upgrade Bulb for the Work Light is the lifetime of the product subject
to the limitations above. If during normal use the LED or LED Bulb
fails, the part will be replaced free of charge.
Warranty Registration is not necessary to obtain the applicable war-
ranty on a MILWAUKEE power tool product. The manufacturing date
of the product will be used to determine the warranty period if no proof
of purchase is provided at the time warranty service is requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT
REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON-
TRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT.
IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT
PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE
LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES,
EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CON-
SEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN
ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS
FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EX-
CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU
OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL.
TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH
DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR-
RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE
EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR-
RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM
STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only.
Please consult the 'Service Center Search' in the Parts & Service sec-
tion of MILWAUKEE's website www.milwaukeetool.com or call 1.800.
SAWDUST (1.800.729.3878) to locate your nearest service facility for
warranty and non-warranty service on a Milwaukee electric power tool.
INSTRUCTIONS DE SÉCURITÉ
IMPORTANTES
AVERTISSEMENT
LES INSTRUCTIONS. Lors de l'utilisation d'outils
électriques, toujours suivre les consignes de
base, notamment :
Avant d'utiliser la lampe, lire le présent manuel
d'utilisation, le manuel d'utilisation du bloc-piles et du
chargeur, ainsi que toutes les étiquettes se trouvant
sur le bloc-piles, le chargeur et la lampe.
• Lire et bien comprendre toutes les instructions
avant d'utiliser l'appareil.
• N'utilisez pas d'aimant pour le montage hori-
zontal.
• Pour réduire le risque de choc électrique,
ne pas submerger la lampe dans l'eau ou
tout autre liquide. Ne pas placer ni entre-
poser l'appareil dans un endroit où il peut tomber
ou être tiré dans un évier ou une baignoire.
• Empêcher les démarrages accidentels. S'assurer
que la gâchette en position d'arrêt avant de
d'insérer batterie, de le ramasser ou de le
transporter. Le fait de transporter de l'appareil en
gardant le doigt sur la gâchette ou de mettre sous
tension un l'appareil lorsque la gâchette est en
position de marche favorise les accidents.
• Déconnectez le bloc-piles de l'appareil avant
d'effectuer des réglages, de changer d'accessoire
ou ranger l'appareil. Ces mesures de sécurité préven-
tives réduisent les risques de démarrage accidentel
l'appareil.
• Pour réduire les risques de blessures, porter une
attention particulière lorsque le produit est utilisé
en présence d'enfants.
• Lorsqu'elle n'est pas utilisée, garder la lampe
hors de la portée des enfants. Les lampes
chaudes pourront poser un danger dans les mains
des enfants.
• Ne pas utiliser cet outil à l'extérieur.
• S'il s'agit d'un outil rechargeable, utiliser exclu-
sivement le chargeur fourni par le fabricant afin de
le recharger.
• Prendre connaissance de votre lampe. Lire ce
manuel attentivement pour apprendre les applica-
tions et les contraintes de la lampe ainsi que les
possibles dangers liés à ce type d'outil.
• Doit être rechargée seulement avec le chargeur
spécifié pour la pile. Un chargeur adapté à un
certain type de pile peut créer un risque d'incendie
s'il est utilisé avec d'autres piles.
•Utiliser uniquement la lampe jumelée au bloc-
piles particulièrement indiqué pour cet outil.
L'utilisation de tout autre bloc-piles peut poser un
risque d'incendie.
• Lorsque le bloc-batterie n'est pas en service,
tenez-le à l'écart d'autres objets métalliques
(trombones, pièces de monnaie, clés, clous, vis,
etc.) susceptibles d'établir un contact électrique
entre les deux bornes. La mise en court-circuit des
bornes de la batterie peut produire des étincelles et
constitue un risque de brûlures ou d'incendie.
5
LIRE ET VEILLER À BIEN
COMPRENDRE TOUTES

Publicité

loading

Ce manuel est également adapté pour:

2127-20