SC iStick Pico Mode D'emploi page 83

SC iStick Pico Set – Selection & Operating of the Modes
Setting the TCR mode (M1, M2, M3)
With the device off, press the Fire and "Up" buttons simultaneously for a few seconds to switch to
the TCR menu:
1� Press the "Up" or "Down" button to switch between TCR, M1, M2, and M3�
2� Press the Fire button to confirm the selected mode�
3� Press the "Up" or "Down" adjustment buttons to change the settings to match the coil on the
atomizer head you are using�
4� Hold the Fire button down or wait 10 seconds to confirm the settings�
Following are different TCR value ranges for different coils for your reference:
Material
TCR Value Range
Nickel Titanium
600-700 300-400
NiFe SS (303,304,316,317)
300-400 80-200
81
Note
1� The TCR value in the sheet is 10
multiplied of the actual TCR�
2� Our total range of TCR value is
1-1000�
5