SC iStick Pico Mode D'emploi page 73

SC iStick Pico Set – Commissioning of the Device
Exchanging the atomizer head
1� Remove the Melo 3 Mini Clearomizer from the battery of your e-cigarette�
2� Turn it such that the mouthpiece is pointed downward, and remove the atomizer head base with
hidden Airflow Control from the glass tank of the device�
3� Unscrew the old atomizer head and replace it with a new one�
4� Then re-assemble all of the pieces and ensure that no liquid can leak out� Screw the Clearomizer back
onto the battery and give the new atomizer head enough time to saturate itself with liquid�
Please note the following:
Before the first use, always drizzle a few drops of your liquid on the atomizer head, and allow it to stand
in the tank filled with liquid for approximately 15 minutes after installation before vaping� Do not clean
the atomizer head with water� If necessary, simply wipe it off with a dry cloth�
Since atomizer heads are wear parts, they need to be exchanged regularly�
71