Maintenance And Diagnosis Of Failures; Maintenance; Spare Parts; Failure Diagnosis - Erreka CLEVER01 Manuel De L'installateur

MAINTENANCE AND DIAGNOSIS OF FAILURES

1

MAINTENANCE


Disconnect the device from the power supply before carrying out any maintenance operation.
1 Frequently check the installation in order to detect
any imbalance or sign of deterioration or wear. Do
not use the device if any repair or adjustment is
necessary.
2

SPARE PARTS

 If the device needs repairing, go to an
authorised assistance centre or manufacturer;
never try to repair it yourself.
3

FAILURE DIAGNOSIS

SW1
Diagnosis items
L1 Opening device (A.T.) indicator activated
L2 Closing safety device contacts (SG.C) indicator
closed
L3 Shutter gate open indicator
L4 Radio code programming / receiving radio
code indicator (RSD)
L5 Power supply indicator
28
Installation Manual
T.E.
L4
L3
L1 L2
2 Check that the operation and safety devices
(photocells or safety strips), as well as their
installation, have not suffered any damage from the
weather or external agents.
 Use only original spare parts.
L5
T.M.
RL1 RL2
F2
F1 Main fuse (5x20):
CLEVER01: 2.5A (230V/50Hz);
CLEVER01M: 6.3A (125V/ 60Hz)
F2 Peripheral power supply fuse (5x20): 350mA
T.E Standby time regulation
T.M. Operation time adjustment
S1 Main switch
SW1 Radio code programming mini-push button
RL1 Close relay
RL2 Open relay
F1
S1
P166N