Technical Description; Construction; Functional Description - oventrop Multidis SF Notice D'utilisation

Technical description

3. Technical description

3.1 Construction

1
5
Abb. 1: Construction flow distributor
(1) Adapter G 1
(2)
Flow measuring and regulating device
(3)
Fill and drain valve G ¾
(4) Flow distributor
(6) Connection nipple G ¾ male thread
(cone "Euro" according to DIN EN
16313)
1
6
Abb. 2: Construction return collector
(1)
Adapter G 1
(2) Valve insert
(3) Protection cap
(4) Fill and drain valve G ¾
20
2 3
4
2 3 4
5
(5)
Return collector
(6) Connection nipple G ¾ male thread
(cone "Euro" according to DIN EN
16313)

3.2 Functional description

The stainless steel distributor/collector
"Multidis SF" serves the distribution of the fluid
to the surface heating/cooling circuits.
The valve inserts in the return collector have
a connection thread M 30 x 1.5 and can be
equipped with a thermostat or actuator for
individual room temperature control.
Printed tags for marking the surface heating/
cooling circuit connections are supplied with
the stainless steel distributor/collector.
The heating/cooling circuits can be filled,
flushed and bled via the fill and drain valves.
Install a ball valve in front of the flow
distributor/return collector for the
isolation of the supply and return
pipe.
"Multidis SF"
140635280-V01.07.2018