Foreseeable Misuse; Modifications To The Product; Warnings; Safety Notes - oventrop Multidis SF Notice D'utilisation

Safety-related information
Claims of any kind against the manufacturer
and/or his authorised representatives, due to
damages caused by incorrect use cannot be
accepted.
The observance of the operating instructions is
part of the compliance terms.

2.3 Foreseeable misuse

Constructive measures are not sufficient to
exclude misuse.
The following must therefore be avoided:
• Mixing up of supply and return.
• Operation with aggressive fluids (e.g.
steam or oil).

2.4 Modifications to the product

Modifications to the product are not allowed.
In case of modifications to the product, the
warranty will become void. The manufacturer
will not accept liability for damages and
malfunctions caused by modifications to the
product.

2.5 Warnings

Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger!
Possible consequences if the danger
occurs or the warning is ignored.
f Possibilities of avoiding the danger.
Warnings are displayed by different signal
words (DANGER, WARNING, CAUTION,
NOTICE).
The signal words define the seriousness of the
danger which arises from a situation.
WARNING
Indicates a possible danger with
moderate risk. It may lead to death
or serious injury if the situation is not
avoided.
18
CAUTION
Indicates a possible danger with
low risk. It may lead to minor and
reversible injury if the situation is not
avoided.
NOTICE
Indicates a situation which may lead to
damage to property if not avoided.

2.6 Safety notes

This product is manufactured in accordance
with the latest technical status and is fail-safe.
Nevertheless, there might still be a residual
danger for persons and property. The following
safety notes must be observed.
2.6.1 Danger in case of inadequate
personnel qualification
Have all work on this product carried out by
qualified tradesmen.
Sanitary, heating and air-conditioning
specialist
The following work must only be carried
out by a qualified sanitary, heating and air-
conditioning specialist:
• Installation
• Commissioning
• Troubleshooting
• Maintenance
• Removal and disposal
Due to professional training, knowledge
and experience as well as knowledge of
the relevant standards and regulations, the
sanitary, heating and air-conditioning specialist
is in a position to carry out any work on heating
and potable water installations. He has to
recognize possible dangers.
User
The following work may be carried out by the
user:
• Operation of the device
"Multidis SF"
140635280-V01.07.2018