Important Information; 1.1 Warning Instructions; 1.2 Safety Instructions - Helios AMD Série Notice De Montage Et D'utilisation

Installation and Operating Instructions
CHAPTER 1
SAFETY
m
DANGER
m
WARNING
m
CAUTION
ATTENTION
AMD – Medium-pressure axial fans
1.0

Important information

In order to ensure complete and effective operation and for your own safety, all of the following instructions should be
read carefully and observed.
This document should be regarded as part of the product and as such should be kept accessible and durable. The
operator is responsible for observing all plant-related safety regulations
The approval associated with the unit and the declaration of performance must be observed!

1.1 Warning instructions

The adjacent symbols are safety-relevant warning symbols. All safety re-
gulations and/or symbols in must be absolutely adhered to, so that any
dangerous situations are avoided!

1.2 Safety instructions

l
Protective glasses
Serves to protect against eye injuries.
p
Ear protectors
Serves to protect against all kinds of noise.
r
Protective clothing
Primarily serves to protect against contact with moving parts.
Do not wear rings, chains or other jewellery.
n
Protective gloves
Protective gloves serve to protect the hands against rubbing, abrasions, cuts
or more profound injuries, as well as contact with hot surfaces.
m
Protective footwear
Protective footwear serves to protect against heavy falling parts and from slip-
ping on slippery surfaces.
Hair net
The hair net primarily serves to protect long hair against contact with moving
parts.
Special regulations apply for use, connection and operation. Consultation is
required in case of doubt. Further information can be found in the relevant
standards, federal laws, regional building codes and special building codes.
m With regard to all work on the fan, the generally applicable safety at work
and accident prevention regulations must be observed!
The unit must be fully isolated from the power supply and secured against
•
being inadvertently switched on again before all maintenance and installati-
on work or before opening the terminal compartment! The electrical connec-
tion must only be carried out by an authorised electrician according to the
following wiring diagrams!
Transport fan in packaging until installation!
•
Only transport fans using means of transport that are appropriate for the
•
weight, wear protective gloves during transport!
Observe attached transportation diagram!
•
Ensure the suitable load capacity and properties of the mounting surface
•
and use suitable mounting material.
1
EN