Important Information; Warning Instructions; Safety Instructions - Helios HSDV Notice De Montage Et D'utilisation

Installation and Operating Instructions
CHAPTER 1
SAFETY
m
DANGER
m
WARNING
m
CAUTION
HSDV – Roof Fan Attenuator
1 .1

Important information

In order to ensure complete and effective operation and for your own safety, all of the following instructions should be
read carefully and observed.
This document should be regarded as part of the product and as such should be kept accessible and durable. The
operator is responsible for observing all plant-related safety regulations.

1 .2 Warning instructions

These symbols are safety-relevant prominent warning symbols . All safety
regulations and/or symbols in must be absolutely adhered to, so that any
risks of injury and dangerous situations are avoided!

1 .3 Safety instructions

l
Protective glasses
Serves to protect against eye injuries.
r
Protective clothing
Primarily serves to protect against contact with moving parts. Do not wear
rings, chains or other jewellery.
n
Protective gloves
Protective gloves serve to protect the hands against rubbing, abrasions, cuts,
punctures or more severe injuries, as well as contact with hot surfaces.
m
Protective footwear
Protective footwear serves to protect against heavy falling parts and from
slipping on slippery surfaces.
Hair net
The hair net primarily serves to protect long hair against contact with moving
parts.
Special regulations apply for use and operation. Consultation is required in
case of doubt. Further information can be found in the relevant standards and
legal texts.
m With regard to all work on the fan, the generally applicable safety at work
and accident prevention regulations must be observed!
• Do not stand under suspended loads!
• The installation must only be carried out by suitable specialist personnel!
• Only transport fans using means of transport that are appropriate for the
weight. Wear protective gloves during transport!
• Wear protective gloves/footwear when unpacking the unit.
• Ensure the suitable load capacity and properties of the mounting surface
and use suitable mounting material.
• all plant-related safety regulations must be observed! If applicable, further
country-specific regulations must also be observed!
• The outlet area must be kept free from objects and material that could be
ejected.
• A uniform inflow and free outlet must be ensured!
1
EN