Warranty - Ergon PC2 Instructions D'installation Et D'utilisation

32

Warranty

All Ergon products are designed and thoroughly tested with the demands of the application
in mind. In order to ensure optimal enjoyment of our products, it is important to ensure the
following is observed:
Correct Installation – please ensure that the pedals have been fitted in accordance with
our instructions. Failure to do so could result in injury or in extreme cases be life threatening.
Following any accidents with your bicycle it is important to check the pedals are still correctly
installed and undamaged to ensure continued enjoyment. If you are unsure, please contact
a professional.
Maintenance: Pedals should be kept clean. It is recommended that this is done using
warm water with a very dilute detergent, a cloth, sponge or a soft bristled brush. Do not
use a pressure washer or high pressure hose as these will damage the bearing seals and
reduce the life to the product. Do not use abrasive materials or harsh detergents. Do not use
solvents or alcohol as these may damage the pedals.
The IGUS® polymer bearings are maintenance free, and are sufficiently lubricated for the
life for the pedal. Over time and with sustained use the bearings will naturally wear, however
the pedals will retain full functionality for many years. For servicing, please contact your local
retailer.
Warranty: Warranty on our products is for two years from the date of purchase. This covers
defects in materials and / or workmanship. Any warranty claims should be made through
your retailer. Proof of purchase will be necessary. Our warranty does not cover any damage
resulting from incorrect use of the product or failure to observe any of the instructions given.
The warranty does not cover crash damage. The warranty is invalid should the product have
been modified in any way. We are reasonable people so if you are in doubt as to whether
you have a warranty claim or not, please contact your retailer.