Dometic TEC 29 Notice D'utilisation page 18

Operating the generator
 Leave the generator running for a few minutes after use without any
consumers before stopping it.
 Abrupt braking, accelerating and driving round bends in the vehicle can
cause problems in the generator's pump system and lead to unwanted
shutdown.
 If you are not using your generator for a longer period of time, start it up
at least every 30 days and leave it running for 15 minutes or more.
8.2 Switching the generator to standby or no function
The generator can be switched to standby or no function with the main switch
(fig. 2 1, page 4) in the control panel.
8.3 Switching the remote control on and off
This switch on the remote control (fig. 3 2, page 4) is for switching the
remote control on and off.
➤ Switch the remote control on with the on/off switch.
✓ The display shows:
The display switches off automatically after 5 minutes if the start button is
not touched within this time.
Press the start button to switch on the display again.
✓ The generator can now be started.
8.4 Starting the generator
The generator can only be started if it is in standby and the remote control is
switched on.
I
NOTE
If the generator is still warm, press the start button briefly to start
it; press longer for a cold generator.
➤ Start up the generator with the start button (fig. 3 3, page 4).
18
.
GEN OFF
TEC29, TEC29LPG
EN