Important Notes; Usage In Accordance With Instructions; User Group; Agreement - Bosch P-Assist S5 Notice Originale

2.

Important notes

Before start up, connecting and operating
Bosch products it is absolutely essen-
tial that the operating instructions/owner's
manual and, in particular, the safety inst-
ructions are studied carefully. By doing so you can
eliminate any uncertainties in handling Bosch products
and thus associated safety risks upfront; something
which is in the interests of your own safety and will
ultimately help avoid damage to the device. When a
Bosch product is handed over to another person, not
only the operating instructions but also the safety
instructions and information on its designated use must
be handed over to the person.
2.1

Usage in accordance with instructions

 The P-Assist S5 is to be used only for adjustment
of distance sensors and cameras on motor vehic-
les. The repair and service instructions specific
to the vehicle manufacturer are authoritative. Any
other or additional application does not constitu-
te intended use.
 The P-Assist S5 may be used only by trained and
briefed personnel. The manufacturer (Bosch
GmbH) assumes no liability for possible damage
arising from improper, incorrect or negligent use.
 Make sure operating and safety instructions are
always to hand at the usage location.
 Heed all the safety instructions and hazard war-
nings on the P-Assist S5 and make sure these are
always complete and clearly legible.
 Operate the P-Assist S5 and the accessories re-
quired for testing only within your specific work
area.
 Before using the P-Assist S5, ensure that it is cor-
rectly set up and connected.
 Observe the intervals specified or given in the
operating instructions for routine checks/mainte-
nance.
 Maintenance work is never to be performed du-
ring operation. Shut-off the unit prior to perfor-
ming maintenance.
 Follow the instructions for switching on and off
stipulated in the operating instructions along
with the notes for repairs when performing any
work!
Robert Bosch GmbH
Important notes | P-Assist S5 | 13
2.2

User group

The product may be used by skilled and instructed per-
sonnel only. Personnel scheduled to be trained, famili-
arized, instructed or to take part in a general training
course may only work with the product under the su-
pervision of an experienced person.
2.3

Agreement

By using the product you agree to the following regulations:
Warranty
Any use of non-approved hardware and software will
result in a modification to our product and thus to exclu-
sion of any liability and warranty, even if the hardware or
software has in the meantime been removed or deleted.
No changes may be made to our products. Our products
may only be used in combination with original acces-
sories and original service parts. Failing to do so, will
render null and void all warranty claims.
2.4

Obligation of workshop operator

The workshop operator is obliged to ensure that all
measures geared towards the prevention of accidents,
industrial diseases, labor-related health risks are taken
and measures towards making the workplace fit for
people to work in are carried out.
Tests (taking Germany as an example):
R
The workshop operator must ensure that all electri-
cal systems and equipment are tested to ensure they
are in proper working order:
$
Before starting for the first time.
$
After modification or repair before starting for
the first time.
$
At given intervals. Set intervals such as to ensu-
re that faults that can be expected to occur are
determined in good time.
| en
|
1 690 386 038 2016-09-05