Symbols Used; In The Documentation; Warning Notices - Structure And Meaning; Symbols In This Documentation - Bosch P-Assist S5 Notice Originale

en | 12 | P-Assist S5 | Symbols used
1.

Symbols used

1.1

In the documentation

1.1.1 Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or people
in the vicinity. Warning notices also indicate the con-
sequences of the hazard as well as preventive action.
Warning notices have the following structure:
Warning
KEY WORD – Nature and source of hazard!
symbol
Consequences of hazard in the event of failu-
re to observe action and information given.
¶
Hazard prevention action and information.
The key word indicates the likelihood of occurrence and
the severity of the hazard in the event of non-observan-
ce:
Key word Probability of
occurrence
DANGER Immediate impen-
ding danger
WARNING Possible impending
danger
CAUTION Possible dangerous
situation
1.1.2

Symbols in this documentation

Symbol Designation Explanation
Attention Warns about possible property damage.
!
Information Practical hints and other
i
useful information.
1. Multi-step Instruction consisting of several steps.
2. operation
One-step Instruction consisting of one step.
e
operation
Intermediate An instruction produces a visible inter-

result mediate result.
Final result There is a visible final result on com-
"
pletion of the instruction.
|
1 690 386 038 2016-09-05
Severity of danger if inst-
ructions not observed
Death or severe injury
Death or severe injury
Minor injury
1.2

On the product

!
Observe all warning notices on products and ensure
they remain legible.
!
Laser radiation, do not view directly with optical ins-
truments, Class 1M laser product. Observe warnings
in section 3.2.
i
Complies with 21 CFR 1040.10 and 1040.11 "except
for deviations pursuant to Laser Notice No.50, dated
June 24, 2007".
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired opera-
tion.
Robert Bosch GmbH